 |
|
Encryption Products |
|
|
 |
|
 |
|

|
- 250 Channel Capacity
- heavy duty construction -
built to last
- Low band, VHF and UHF to
512 MHz
- Power Output:
70W (Low band), 50W (VHF), 40W (UHF)
- 12.5/25 kHz Bandwidth
Programmable by Channel
- 8 Digit Alphanumeric
Display
- 7 Programmable Backlit Keys
- Priority Scan or Group Scan
- Voting (RX Signal Strength)
Scan
- One Head to
Multiple RF Deck Capability
- One RF Deck
to Multiple Head Capability
- Emergency Alarm Feature
- 5 tone Selective calling
option
- Home Channel
- Intercom
- Encryption module option
- Modular options and
features
- Built-in DB25 accessory
connector
- MIL-STD 810 C/D/E
- Size: 7" w x 2.4" h x 7.7"
d
- Weight: 4.9 lbs.
|
| |
Options and accessories |
FEATURES |
| |
VX4000LB |
250 Channels, 70 watts, VHF Low band, 30
to 88 MHz (segmented) |

Optional
dual-head or
dual radio body operation |
| |
VX-4000VC |
250 Channels, 50 Watts, VHF, 148-174 MHz |
| |
VX-4000UD |
250 Channels, 40 Watts, UHF, 450-480 MHz |
| |
MIL-100 |
Mobile Loud Speaker (12 Watts Peak
Power) |
| |
MH-25B7A |
Mobile Microphone (supplied w/radio) |
| |
MH-53A7A |
Mil-Spec Microphone w/Noise Canceller |
| |
MH53B7A |
Mil-Spec DTMF Microphone w/Noise
Canceller |
| |
MD-11A8J |
Desk Microphone |
| |
FP-1023 |
External Power Supply, 23 amp |
| |
VPL-1D |
PC Programming Cable for CT-70 &
Software |
| |
LF-1 |
DC Line Filter |
| |
FVP-25 |
Plug-In Encryption Unit (Band Inversion
type) requires FIF-7 |
| |
FVP-35 |
Encryption Unit (Rolling Code Voice
Scrambler) |
| |
MDC1200 |
Digital ANI Encoder |
| |
F2D-8 |
Two-Tone Decoder, Requires FIF-7 |
| |
VTP-50 |
Trunking Portable Logic Board, Requires
FIF-7 |
| |
FIF-7 |
Interface Board (for VX4000 w/FVP-26;
F2D-8; VTP-50) |
| |
CN-6 |
Connector Board (used for installation
of 3rd-party options) |
| |
MMB-75 |
Mobile Mounting Bracket (supplied
w/radio) |
| |
MMB-76 |
Locking Mobile Mounting Bracket |
|
General |
Low Band |
VHF |
UHF |
|
Frequency
Range |
30 – 88 MHz
(in segments) |
400 - 470 MHz |
136 - 174 MHz
|
|
Number of
channels |
250 |
250 |
250 |
|
Channel
spacing |
12.5, or 25
KHz programmable per channel |
|
Frequency
error |
± 2 ppm |
|
RF-bandwidth |
30 MHz
|
45 MHz |
45 MHz |
|
Mode of
operation |
Simplex /
Semi-duplex (two frequency simplex) |
|
Antenna
impedance |
50 Ohm |
|
Temperature
range |
-30° to +
65°C |
|
Dimensions
|
7" w x 2.4" h
x 7.7" d |
|
Weight |
4.9 Ilbs |
|
Receiver |
|
Intermediate
Frequency |
1.
Intermediate freq: 45 MHz |
2.
Intermediate freq: 450 KHz |
|
Sensitivity @
20 dB
(25 KHz ch. spac.) |
0,6 µV typ. |
0,6 µV typ. |
0,6 µV typ. |
|
SINAD EMF (12
dB) |
0,4 µV typ. |
0,4 µV typ. |
0,4 µV typ. |
|
AF output
power |
5 W internal
and 12 watts to external speaker |
|
AF distortion |
< 10 %
|
|
AF freq.
Response |
300 - 3000 Hz
- 6 dB / Octave |
|
Signal /
noise ratio |
> 45 dB
|
|
Co-channel
rejection |
- 8 dB |
|
Adjacent
channel select |
> dB 70 dB
|
|
Spurious
rejection |
> dB 70 dB |
|
Intermodulation selection. |
> 66 dB |
|
Blocking |
> 100dB
|
|
Spurious
emission |
0,2 nW or -
57 dBm (antenna and cabinet) |
|
Squelch level |
Programmable |
|
Transmitter |
|
Output power
|
70W (Low band), 50W (VHF), 40W (UHF) |
|
Spurious
emission |
< 0,5 ,uW or
- 37 dBm |
|
Max.
Deviation |
+/- 5 KHz /25
KHz channel |
|
Modulation
distortion |
< 5 % @ +/-
3,0 KHz |
|
Signal /
noise ratio |
40 dB
|
|
AF freq.
Response |
300 - 3000 Hz
+ 6 dB octave |
|
Signalling |
|
CCIR, ZVEI,
EEA& EIA (option) |
Encoder &
decoder for up to 3 sequences of 8 tones, programmable tone
length, length of first tone & pre-ample. Individual Call, Group
CalI, All Call, Emergency CaIl, Text Message CalI, Radio Stun
Call, Radio Wake-up Call. |
|
CTCSS / DCS |
Encoder &
Decoder. Each channels can be programmed with different CTCSS
tones. |
|
FFSK (Option) |
Encoder &
decoder: 1.200 & 2.400 bps. |
|
Data (Option) |
GMSK
modulator & demodulator for up to 9.600 / 19.200 bps. |
|
SCANNING |
Up to 250
channels or in channel scan groups e.g. 12 scan groups of 10
channels each. Priority channel scan (star mode) or sequential
scan mode. Scanning stop on: carrier detect or carrier and tone
(or data) detect. |
|
|
|

Ultra heavy duty design for heavy duty use
and extreme weather conditions |

Solid die-cast chassis
construction |
|

Military spec microphone connection
|

Software programmable
function keys (back-lit)
|
|
Accessories |
 |
 |
 |
 |
| RMK-6000SH |
RMK-6000DH |
RMK-6000DB |
Remote Kit for
Single Transceiver |
RRemote Kit for
Dual-Head Installations |
Remote Kit for
Dual Band Installations |
 |
 |
 |
 |
| RMK-6000BH |
RF DECK w/MMB-75 |
CNT-6000 |
Remote Kit for Dual Band
plus Dual Head Installations |
RF Deck for Multi Band
Operation |
Control Head |
 |

|

|
 |
| CT-81 |
CT-82 |
CT-83 |
Cable for RMK-4000
20 ft (6 m) |
Cable for RMK-4000
8 ft (2.5 m) |
Cable for RMK-4000
2 ft (0.6 m) |
 |
 |
 |
 |
| F2D-8 |
F5D-14 |
VTP-50 |
2-Tone Decode Unit
(Requires FIF-7) |
5-Tone ENC/DEC Unit
(Requires FIF-7) |
VX-Trunk Unit
(Requires FIF-7) |
 |
 |
 |
 |
| FVP-25 |
FIF-7 |
CN-6 |
Encryption/DTMF Pager
Unit (Requires FIF-7) |
Interface Board for
F2D-8,F5D-14,VTP-50,FVP-25 |
Interface Board for
Accessories |
 |
 |
 |
 |
| MH-25B7A |
MH-53A7A |
MH-53B7A |
Standard
Microphone |
Heavy Duty
Microphone |
Heavy Duty
Noise Canceling
Microphone |
 |
 |
 |
 |
| MH-53C7A |
MLS-100 |
FP-1023(30A) |
Heavy Duty
Noise Cancelling
DTMF Microphone |
Mobile Loud Speaker
(12 W Peak Power) |
External Power
Supply
(13.8 V, 23 A) |
 |
 |
 |
 |
| MMB-77(VX-6000) |
Brochure |
MMB-76(VX-4000) |
| Mobile Mounting Btacket |
Locking Mobile Mounting
Bracket |
Mobile Mounting
Bracket |
 |
 |
 |
 |
| MMB-78(VX-4000) |
LF-1 |
CT-70 |
| Locking Mobile Mounting
Btacket |
Line Filter |
Radio Programming
Cable (Requires VPL-1) |
 |
 |
 |
 |
| CT-71 |
CT-72 |
CE35 |
| Radio Programming Cable |
Radio to Radio
Programming Cable |
Programming Software |
|