 |
|
Encryption Products |
|
|
 |
|
|
|
VHF / UHF Portable Radios |
The
VX-410E/420E Series of 32-Channel VHF/UHF Portables features 5 Watts
of Power Output and a host of leading-edge built-in features for
demanding business/industry and public safety applications. Included
as standard features are Dual 2-Tone Decode, 2-Tone Encode, 5-Tone
Encode/Decode, Encryption, Voice Compander, and Multi-mode Scanning.
The VX-410E/420E may be programmed, by channel, for 12.5/20/25 kHz
channel spacing, and for simplex or split operation.
|
|
 |
|
The
deluxe VX-420E version features an eight-character alphanumeric
display, 4 additional programmable keys and illuminated keypad. Both
the VX-410E and VX-420E are available in Intrinsically Safe
versions, and all are built with legendary Vertex ruggedness and
unmatched cost-performance. |
|
HIGH PEFORMANCE |
|
VERSATILITY |
5 WATTS POWER OUTPUT
The VX-410E/420E Portables produce a full 5 Watts of power output,
with an additional selection of 1 Watt available for increased
battery life when higher power is not required.
12.5/20/25 kHz BANDWIDTH
(PROGRAMMABLE BY CHANNEL)
When programming radios for use in different jurisdictions or
geographical regions, the VX-41 0E/420E Portables may be programmed,
channel by channel, for 12/5, 20, or 25 kHz channel spacing
environments, with both bandwidth and deviation automatically set
according to each channel’s requirements.
LEADING-EDGE DESIGN
Crafted with care for use in areas of severe RF pollution, the VX-41
0E 420E Portables include excellent adjacent-channel selectivity and
immunity from Intermodulation, along with ETSi compliant ±1.5 kHz
frequency stability.
LOUD 500 mW AUDIO
OUTPUT
Ideal for reception in noisy environments, the VX-410E/420E
Portables’ high-powered audio is coupled to a large internal
speaker, assuring solid copy throughout difficult crowd control,
fire, or sporting-event operations.
LONG-LIFE
LITHIUM-ION BATTERY (1600 mAh)
The VX-410E/420E Portables may be equipped with advanced
FNB-V67 Lithium-Ion Battery Packs with 1600 mAh of capacity,
for operating times of up to ten hours or more, even when using
5 Watts (5-5-90 duty cycle).
|
|
32 CHANNEL CAPACITY
The 32-channel capacity of the VX-410E/420E Portables includes quick
access, and the channel-specific information loaded during
programming minimizes the extra keystrokes required on competing
models. Two banks of 16 channels each are provided for convenient
channel access.
|
PROGRAMMABLE “SOFT” KEYS |
|
Two buttons on the side panel of the VX-410E may be
custom-programmed for specific functions needed in your
application. The VX-420E additionally provides four
front-panel programmable keys, for a total of six available
custom buttons. |
 |
OPTIONAL TRUNKING CAPABILITY
Installation of the optional SmarTrunk® module enables use of the
VX-410E /420E on systems equipped for VX-Trunk operation.
DUAL 2-TONE AND 5/6-TONE SYSTEMS BUILT IN
For smooth integration into advanced radio systems, the VX-410E/
420E Portables are equipped with 2-Tone Encode/Decode, Dual 2-Tone
Decode, as well as 5/6-Tone Encode/Dedode circuitry. In addition,
DTMF ANI and DTMF Paging capability is also available through
installation of the optional FVP-25 DTMF Pager Unit. |
|
Easy User Interface |
|
ADVANCED 8-CHARACTER ALPHANUMERIC
DISPLAY
Providing an Alphanumeric Channel Label of up to 8 characters, the
LCD display also provides convenient operating function icons to
provide instant recognition of radio status.
ERGONOMIC CONSTRUCTION
The carefully-engineered case construction features a gently rounded
shape for a solid grip, whether the radio is wet or dry. Its
over-sized keys are easy to activate, and the operating firmware has
been carefully shaped by years of feedback from public safety,
business, industry, and government users.
KEY LOCK
A “Soft” key may be programmed as a “Key Lock” control, to prevent
inadvertent channel change or unwanted activation/deactivation of
functions. This is especially valuable in surveillance operations,
where the radio may be concealed and subject to accidental pressure
on its keys.
RADIO TO RADIO CLONE FEATURE
For quick programming of the VX-410E/420E radios for an emergency
task force, the Clone feature allows copying of all channel and
configuration data from one VX-410E/420E to another, using the
optional CT-27 Cloning Cable.
|
|
SECURITY |
|
DURABLE CONSTRUCTION |
BUILT-IN ENCRYPTION
The built-in Encryption circuit provides security for your important
public safety and private security communications, and it may be
enabled at the time of radio programming by the dealer.
OPTIONAL VOICE RECORDER
The optional DVS-5 Voice Recorder Unit allows you to record and
store up to 120 seconds of incoming receiver audio, ideal for
keeping an audible record of an important message. Audio may be
saved either as a one-time 2-minute recording, or a constantly
refreshing “last 120 seconds” recording may be made.
PROGRAMMING SECURITY
Cloning capability may be disabled at the time of programming, to
prevent unauthorized access to channel data. The transceiver also
may be programmed with an access password, to prevent unauthorized
attempts to gain access to channel data via computer programming.
|
|
ULTRA COMPACT
The VX-410E/420E Series Portables’ features and performance are
housed in an ultra-rugged, compact case measuring only 2.3” (W) x
4.3” (H) x 1.2” (D), and weighing less than a pound with the
standard FNB-V57 Battery.
MIL-STD RATED
Designed for use under the most demanding conditions, the VX-410E
/420E Portables are built in compliance with MIL-STD 810 D/E/F
specifications for reliable operation in environments including
shock, vibration, high and low temperature, low pressure, rain,
humidity, salt fog, and dust.
INTRINSICALLY SAFE (IS) VERSIONS
AVAILABLE (pending)
The VX-410E/420E Portables are also available in Intrinsically Safe
(IS) versions, for leading-edge communications capability in
hazardous operating situations. Included in the IS certification for
the VX-410E/420E is approval for use in dangerous hydrogen and
acetylene environments. |
|
GENERAL |
VX-414E/424E VHF
|
VX-417E/427E UHF
|
|
Frequency Range |
134-160
MHz (A)
146-174 MHz (C) |
400-430
MHz (AS)
420-450 MHz (B)
450-490 MHz (D) |
|
Number of Channels |
32
channel (16 channel x 2 banks)
|
|
Channel Spacing |
25/20/1 2.5 kHz
|
|
Battery voltage |
7.5
VDC
|
|
Temperature Range |
-22°
F to +140° F (-30° C to +60° C)
|
|
Frequency Stability |
+1.5
kHz(EN) <±2.5 ppm(TIA/EIA)
|
| Case
size (WxHxD) |
2.3
x 4.3 x 1.2 inches with FNB-V57 (58 x 108.5 x 30 mm with
FNB-V57)
|
|
Weight
(approx) |
0.71
lb (320 grams) with FNB-V57, antenna and belt clip
|
|
RECEIVER |
Sensitivity
20 dB SINAD
12 dB SINAD |
-4
dB µV (EN)
0.20 µV (TIA/EIA)
|
-3
dB µV (EN)
0.25 µV (TIA/EIA)
|
|
Adjacent Channel Selectivity |
70
dB / 70 dB / 60dB(EN; TIA/EIA)
|
|
Intermodulation |
65
dB(EN) 70dB(TIA/EIA)
|
|
Spurious response rejection |
70dB
|
| Hum
& Noise |
45
dB (TIA/EIA)
|
|
Audio output |
500
mW @4 Ohm, 10% THD
|
|
TRANSMITTER |
|
Power
Output |
5.0/1.0W
|
|
Modulation Limiting (EN) |
±5.0
kHz at 25 kHz ±4.0 kHz at 20 kHz ±2.5 kHz at 12.5 kHz
|
| Type
of emission |
16K0F3E / 14K0F3E / 11K0F3E(TIA/EIA)
|
|
Conducted Spurious Emissions |
0.25
gW(EN) 73 dB (TIA/EIA)
|
| FM
Noise |
45dB
/ 45dB / 40dB (TIA/EIA)
|
|
Modulation distortion(@1 kHz) |
3%
|
Measurements per
ETS:EN 200 086 standards unless noted above
Specifications subject to change without notice or obligation.
|
Standard |
MIL
810D
Methods/Procedures
|
MIL
810E
Methods/Procedures
|
MIL
810F
Methods/Procedures
|
|
Low
Pressure
|
500.2/Procedure 1,11
|
500.3/Procedure 1,11
|
500.4/Procedure 1,11
|
|
High
Temperature
|
501.2/Procedure 1,11
|
501.3/Procedure 1,11
|
501.4/Procedure 1,11
|
|
Low
Temperature
|
502.2/Procedure I
|
502.3/Procedure 1,11
|
502.4/Procedure 1,11
|
|
Temperature Shock
|
505.2/Procedure I
|
505.3/Procedure I
|
505.4/Procedure 1,11
|
|
Rain
|
506.2/Procedure 1,11
|
506.3/Procedure 1,11
|
506.4/Procedure 1,111
|
|
Humidity
|
507.2/Procedure II, III
|
507.3/Procedure II, III
|
507.4/Procedure I
|
|
Dust
|
510.2/Procedure I
|
510.3/Procedure I
|
510.4/Procedure 1,111
|
|
Vibration
|
514.3/Procedure Cat. 10
|
514.4/Procedure Cat. 10
|
514.5/Procedure Cat. 10
|
|
Shock
|
516.3/Procedure I, IV
|
516.4/Procedure I, 1V
|
516.5/Procedure I, IV
|
|
|
|
|
