 |
|
Encryption Products |
|
|
 |
|
|
|
The VX-800EEx
series of portables are unique high power Intrinsically Safe radios
approved to the latest ATEX
approval specifications.
With a range of
signalling and scanning capabilities the VX-800EEx is ideally suited to
Public Safety, Emergency Services, Oil and Gas industry and any other
area where explosive atmospheres may be encountered. |
|
Featuring |
|
 |
Frequency range
440-485MHz, 146-174MHz |
|
200 channels |
| 4
watts power output (0.5 to 4 watts) |
| II
1 G, EEx ia IIC T4 with 5 Duracell batteries |
II
2 G, EEx ib IIC T3 with Nicad battery
(FNB-V800EEx) |
|
12.5kHz/25kHz switchable |
| 8
character alphanumeric display (reversible) |
|
Definable scan modes |
|
BCLO, BTLO and TOT functions |
|
Programmable soft keys |
| PC
programmable |
|
Radio to Radio cloning |
|
Encryption/DTMF paging unit available |
|
Selective calling unit available |
|
General Specifications
|
VX-800 (VHF)
|
VX-800 (UHF)
|
|
Number of Channels |
200 Channels
|
|
Frequency Range |
134-160MHz (A)
146-174MHz (C) |
450-485MHz (D)
440-470MHz (CS)
400-430MHz (ASI) |
|
Channel Spacing |
12.5/25/30kHz
(PLL Step 1.25/2.5/5/6.25 kHz)
|
12.5/25/30kHz
(PLL Step 5/6.25 kHz)
|
|
Power Supply Voltage |
7.2VDC
|
|
Battery Life w/FNB-V800EEx
(5-5-90 duty) |
9hrs (12hrs w/saver)
at 4W |
9hrs (12hrs
w/saver)
at 4W
|
|
Ambient Temperature Range |
-20°C to +55° C
|
|
Frequency Stability |
Better than
±2.5ppm
|
| RF
Input-Output Impedance |
50 Ohms
|
|
Dimensions (W x H x D) |
2.3" x 4.3" x
1.1" (58 x110 x28.9 mm)
w/FNB-V800EEx
|
|
Weight (approx.) |
0.77 lbs. (352
grams)
w/FNB-V800EEx, antenna, belt clip
|
|
Receiver
Specifications
|
Measurements made per ETSI
ETS 300 086
|
|
Circuit Type |
Double Conversion
Superheterodyne
|
Sensitivity
EIA 12-dB SINAD 20 dB Quieting |
0.2µV
0.35µV
|
Adjacent Channel Selectivity
25 kHz / 12.5 kHz channel spacing |
75dB / 70dB
|
75dB / 68dB
|
Intermodulation
25 kHz / 12.5 kHz |
75dB / 68dB
|
75dB / 65dB
|
|
Spurious & Image Rejection |
75dB
|
|
Audio Output |
0.5W @ 16 Ohms,
<3 % THD (BTL output)
|
|
Transmitter Specifications
|
Measurements made per ETSI
ETS 300 086
|
|
Power Output |
4.0, 0.5 W
(Selectable)
|
|
Modulation |
Direct FM 16K0F3E
/ Direct FM 11K0F3E
|
|
Conducted Spurious Emissions |
70 dB Below
Carrier
|
|
Audio Distortion @ 1 kHz |
< 3 %
|
Measurements
per EIA standards unless noted above. Specifications subject to change
without notice or obligation.
ATEX approval certificate number LCIE 03 ATEX 6150 X
II 1 G, EEx ia IIC T4 when used with 5 Duracell batteries type
MN1500LR6 fitted to FBA-800EEx empty battery case
II 2 G, EEx ib IIC T3 when used with FNB-800EEx Nicad battery pack |
|
Miltary
Standards 810C
|
Miltary
Standards 810D/E
|
|
Method 501.1,
Procedure 1 & 2 |
Method 500 2/3,
Procedure 2 |
Method 509.2/3,
Procedure 1 |
|
Method 502.1,
Procedure 1 |
Method 501.2/3,
Procedure 1 & 2 |
Method 510,2/3,
Procedure 1 |
|
Method 503.1,
Procedure 1 |
Method 502.2/3,
Procedure 1 & 2 |
Method
514.3/4,Procedure 1, Cat.10 |
|
Method 505.1,
Procedure 1 |
Method 503.2/3,
Procedure 1 |
Method 516.3/4,
Procedure 1 |
|
Method 507.1,
Procedure 2 |
Method 505.2/3,
Procedure 1 |
Method 516.3/4,
Procedure 4 |
|
Method 514.2,
Procedure 8 & 10 |
Method 506.2/3,
Procedure 1 & 2 |
|
|
Method 516.2,
Procedure 1 & 5 |
Method 507.2/3,
Procedure 2 |
|
|
Accessories &
Options |
|
FVP-25EEx
|
Encryption/DTMF Pager
Unit |
|
FNB-V800EEx |
7.2 V
1100 mAh Ni-Cd Battery |
|
FBA-800EEx |
Alkaline Battery Case (LR 6x6) |
|
NC-77C |
Desktop Overnight Charger (240 VAC) (for FNB-V800EEx) |
|
VAC-6800 |
6
Unit Multi Charger (for FNB-V800EEx) |
|
VAC-800C |
Desktop Rapid Charger (240VAC) (for FNB-V800EEx) |
| VCM-1
|
Mobile Mounting Bracket for VAC-800C |
|
MH-50A7AEEx |
Speaker/Microphone |
|
LCC-800 |
Leather Case (LCC-800S Swivel) |
|
LCC-800/TT |
Leather case w/keypad(LCC-800S/TT Swivel) |
| CT-70
|
Radio
Programming Cable (Requires VPL-1) |
| CT-72 |
Radio
to Radio Programming Cable |
| |
|
|
Various accessories listed may not be available in some countries. |
 |
|
|
|
