|
25 WATTS OF POWER
The VXR-9000E provides 25 Watts of clean, reliable power output in
its standard configuration.
EXCELLENT RECEIVER PERFORMANCE
The VXR-9000E is crafted to survive in the most difficult RF
environments. Outstanding selectivity, intermodulation rejection,
and spurious and image rejection performance ensure reliable service
during peak spectrum congestion times.
AUDIO COMPANDING PER CHANNEL
The VXR-9000E’s versatile configuration capability permits inclusion
of narrow-band, compandered channels among wide-band, non-compandered
channels.
DC BACKUP WITH ALERT
Should DC power fail at the repeater site, the VXR-9000E will
automatically revert to a backup DC power source, if available.
Under emergency DC power, the repeater will transmit an alert
message, to alert the communications supervisor that the DC power
situation requires immediate attention at the repeater site.
CONSERVATIVE DESIGN FOR HIGH
RELIABILITY
The large-diameter cooling fan (8 cm) is thermostatically
controlled, ensuring a stable temperature environment for the
VXR-9000E. Fan operation may be programmed via software (Off,
Continuous, or Temperature-Controlled), and a “Malfunction” alarm is
provided.
 |
|
READY FOR RACK MOUNTING
For easy integration into existing repeater sites, the VXR9000E is
shipped ready for mounting in a standard 19”
32 CHANNEL CAPACITY
The VXR-9000E may be dealer-programmed with up to 32 channels over a
wide frequency range, and may be operated either in a “Repeater” or
“Base Station” mode,
depending on your application.
SIX DUAL-FUNCTION PROGRAMMABLE KEYS ON
FRONT PANEL
Over twenty different functions are available for selection and
assignment to any of the six dual-function programmable keys on the
front panel of the VXR-9000E. These functions include Channel
Up/Down, High/Low Power, Repeater/Base mode, Encryption On/Off,
Transmit/Receive, Panel Lights On/Off, and many more!
DSUB 25-PIN ACCESSORY CONNECTOR ON REAR PANEL
For convenient interfacing to external controllers or other
accessories, the rear-panel DSUB 25-Pin Accessory Jack provides
access to important repeater circuitry without the need for a
specialized connector.
PROGRAMMABLE MESSAGE BANKS
Enter date, subject, and notes such as programming or service memos,
for recall at any time in the future.
 |
|
SELECTABLE ENCRYPTION OPTIONS
The VXR-9000E may be set up for either rolling code or
inversion-type encryption (optional module required). The security
required by your customer is available for easy installation.
FIVE-STEP AUTOMATIC COMMAND SEQUENCE
During certain operating events (such as Startup, switch from main
DC to backup DC, etc.) the VXR-9000E may be programmed to undertake
an automatic sequence of commands, so it can be configured for the
particular event. For example, if DC fails and the repeater switches
to emergency DC, the repeater can be set up to switch to Low Power,
send a CW ID advising of the DC power situation, and other
auto-command sequences, as well.
TWO-TONE DECODE STARTUP
The VXR-9000E may be booted up using two-tone commands. Four popular
two-tone formats are supported, and the precise frequencies of each
of the two tones may be manually adjusted from 100 Hz to 5 kHz, in
0.1 Hz steps.
|
